25SA Rule Fully Automatic 500 Submersible pump 12 volt DC with 750mm cable

Fully automated bilge pump with computerised operation

• Connections:For 19mm (3/4″) bore hose.
• Dimensions:107mm high, 64mm x 74mm.
• Current Draw:6(amps)
• Fuse Size:4(amp)
• Output:Up to 31 litres/minute (7 gallons/minute) at 12v, without check valve. Max. recommended discharge head 2m.
• Fully automated bilge pump with computerised operation.
• Tough plastic body with integral strainer.
• Quick release strainer allows rapid cleaning.
• Low amp draw conserves batteries.
  Checks for water every 2 1/2 minutes (Runs for 1/2 second)
  Consumes 0.20 amps per day
• Built-in Thermal Cut-Off.
• Check Valve included for Back Flow Prevention.
• Vented body to prevent air locking.
• Threaded port for easier installation and maintenance.
• No Need for separate float switch, third wire for manual override.
• Base not interchangeable with old range but can be fitted to existing screw holes.
• Packaged Dimensions: L:18.00 x H:17.00 x W:9.00cm
• Actual Weight: 0.41 Kg  (Approx. 0.61 Kg packed)